Description
MPS12-125-135 – Microbore Parallel Shank Boring Bar
Parallel Shank
 | ||||||||
Boring Bar | ||||||||
Boring Range | E MIN | L | Shank Ø | Cartridge Unit | Insert Type | Microbore Bar Part No. | ||
A | ||||||||
Min | Max | Fig. | Insert | |||||
12.5 | 14.5 | 2.4 | 135.0 | 12.0 | 1 | WBGT030102LW | ||
12.2 | 13.0 | 1.2 | 135.0 | 12.0 | 3 | Brazed | ||
14.8 | 17.0 | 2.3 | 135.0 | 12.0 | 3 | Brazed | ||
MINIMUM DIAMETERS ALLOW BAR TO FLAT BOTTOM. THE MINIMUM DIAMETER CAN BE REDUCED IF MACHINING A THROUGH BORE.
REFER TO MICROBORE UNIT RANGE CATALOGUE FOR STYLES OF CARTRIDGES AVAILABLE.
NOTE: OTHER TAPERS AND FLASH CHANGE SHANKS ARE AVAILABLE ON REQUEST.
Reviews
There are no reviews yet.