Microbore Triangular Indexable Unit M2A2T06-40
Headed Unit with Captive Dial
For Use with:
- Boring Bar:
- Insert: TC_ _06T1_ _
Angular Mounted Unit Spares
Microbore Unit: M2A2T06-40
Dial Wrench: 2330A
Lockscrew – A Length: MS102
Lockscrew – B Length:
Lockscrew Wrench: M2 (2.0mm AF)
Top Adjust Spring: 2243
Insert Screw: DIT6
Insert Key: T6
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.