Microbore Triangular Indexable Unit M1B2WB03-40
|Microbore Unit||Insert||Dimension L in mm||Dimension M in mm||Dimension R in mm||Dimension S in mm||Dimension T in mm||Dimension H in mm|
|* = HEADED UNIT WITH CAPTIVE DIAL|
Headed Unit with Captive Dial
For Use with:
- Boring Bar: MPS12-125-135
- Insert: WBGT060102 LW Sumitomo
Angular Mounted Unit Spares
|Microbore Unit||Dial||Dial Wrench||Lockscrew||Lockscrew Wrench||Washer||Top Adjust Spring||Insert Screw||Insert Key|
|A Length||B Length|
|Angular Mounted Unit Spares||M1B2WB03-40||Captive||1330A||-||MS100||M2 (2.0mm AF)||N/A||N/A||BHF 02035||T6|
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.