Description
Microbore Rhomboid Indexable Unit M072-0L095C09-100
| Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm | |
|---|---|---|---|---|---|---|---|---|
| M072-0L095C09-100 | CC__09T3__ | EUROPEAN STANDARD HEADED UNIT 95°APPROACH | 66.8 | 78.0 | 20.1 | 26.5 | 19.8 | 0.2 |
Complete Unit – Including Cartridge, Dial, Lockscrew & Spring Washers
EUROPEAN STANDARD HEADED UNIT 95° APPROACH ( Fig 2 )
Right-handed version
For Use with:
- Boring Bar:
MSS32BS850-50
RM081-ADE2248
RM116-ADE2248
RM136AL-ADE3282
RM177AL-ADE3282
RM218AL-ADE3282
RM259AL-ADE3282
RM300AL-ADE3282
RM341AL-ADE3282
RM382AL-ADE3282
- Insert:
CC_ _09T3_ _
Generally ex-stock but allow 1-2 weeks
Left-handed version available on request – contact us
Spares List
Square Mounted Headed Unit Spares
| EUROPEAN STANDARD SQUARE MOUNTED HEADED UNIT 95° APPROACH (Fig 2) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
 |  |  |  |  |  |  |  | ||
| Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | |
| Square Mounted Headed Unit Spares | M072-0L095C09-100 | 7760 | 5330A | MS117 | M7 | 7306 | 7243 | C04008 | T15 |
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Reviews
There are no reviews yet.