Description
Microbore Triangular Indexable Unit M070-BS090T16-100GA
| Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm | |
|---|---|---|---|---|---|---|---|---|
| M070-BS090T16-100GA | TC__16T3__ | UK STANDARD GEAR ADJUST UNIT 90° APPROACH (FIG. 1) | 53.6 | 65.8 | 5.0 | 20.9 | 19.8 | 3.2 |
Complete Unit – Including Cartridge, Dial, Lockscrew & Spring Washers
U.K STANDARD GEAR ADJUST UNIT 90° APPROACH (Fig 1)
For Use with:
- Boring Bar:
- Insert: TC_ _16T3_ _
Spares List
Gear Adjust Unit Spares
| UK STANDARD GEAR ADJUST HEADED UNIT 90° APPROACH (Fig. 1) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
 |  |  |  |  |  |  |  | ||
| Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | |
| Gear Adjust Unit Spares | M070-BS090T16-100GA | 7860 | 5842 | MS211 | M7 | GRE07 | P3511 | T15 | |
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Reviews
There are no reviews yet.