Description
Microbore Triangular Indexable Unit M032-0L095T06-50GA
| Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm | |
|---|---|---|---|---|---|---|---|---|
| M032-0L095T06-50GA | TC__06T1__ | EUROPEAN STANDARD GEAR ADJUST UNIT 95°APPROACH (FIG. 2) | 25.1 | 31.0 | 5.0 | 8.3 | 9.4 | 0.8 |
| M032-0L095TC-50GA | U3.8803L | EUROPEAN STANDARD GEAR ADJUST UNIT 95°APPROACH (FIG. 2) | 25.1 | 31.0 | 5.0 | 8.3 | 9.4 | 0.8 |
| M032BS095T06-50GA | TC__06T1__ | EUROPEAN STANDARD GEAR ADJUST UNIT 95°APPROACH (FIG. 2) | 23.6 | 31.0 | 4.5 | 8.3 | 9.4 | 0.8 |
| M032BS095TC-50GA | U3.8803L | EUROPEAN STANDARD GEAR ADJUST UNIT 95°APPROACH (FIG. 2) | 23.6 | 31.0 | 4.5 | 8.3 | 9.4 | 0.8 |
Complete Unit – Including Cartridge, Dial, Lockscrew & Spring Washers
EUROPEAN STANDARD GEAR ADJUST UNIT 95° APPROACH (Fig 2)
For Use with:
- Boring Bar:
- Insert: TC_ _06T1_ _
Spares List
Gear Adjust Unit Spares
| EUROPEAN STANDARD GEAR ADJUST HEADED UNIT 95° APPROACH (Fig. 2) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
 |  |  |  |  |  |  |  | ||
| Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | |
| Gear Adjust Unit Spares | M032-0L095T06-50GA | Captive | 2842 | MS205 | M3 | GRE03 | DIT6 | T6 | |
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Standard Microbore Gear Adjust Accessories
NR3821 Spares Set – includes Worm, Spacer, Snap Ring – Sold only as a set
2842 – G.A. Wrench
Microbore strongly advise that any reconditioning work on gear adjust boring bars or boring rings is carried out by factory trained technicians.
Reviews
There are no reviews yet.