Description
Microbore Triangular Indexable Unit M7A5T16-100
| Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm |
|---|---|---|---|---|---|---|---|
| *M2A5T06-50 | TC__06T1__ | 21.0 | 24.3 | 5.5 | 9.7 | 2.0 | 1.2 |
| *M2B5T06-50 | TC__06T1__ | 17.9 | 21.1 | 2.5 | 9.7 | 2.0 | 1.2 |
| *M3A5T09-50 | TC__0902__ | 26.6 | 31.0 | 7.9 | 12.3 | 3.0 | 1.6 |
| *M3B5T09-50 | TC__0902__ | 22.6 | 27.0 | 4.0 | 12.3 | 3.0 | 1.6 |
| M5A5T11-50 | TC__1102__ | 39.7 | 48.4 | 13.5 | 16.0 | 5.4 | 2.4 |
| M5B5T11-50 | TC__1102__ | 33.3 | 42.1 | 7.1 | 16.0 | 5.4 | 2.4 |
| M7A5T16-100 | TC__16T3__ | 55.6 | 66.7 | 16.7 | 25.4 | 6.4 | 3.2 |
| M7B5T16-100 | TC__16T3__ | 49.2 | 60.3 | 10.3 | 25.4 | 6.4 | 3.2 |
| M10A5T16-100 | TC__16T3__ | 76.2 | 88.9 | 28.6 | 31.8 | 9.5 | 4.8 |
| M10B5T16-100 | TC__16T3__ | 63.5 | 76.2 | 15.9 | 31.8 | 9.5 | 4.8 |
| * = HEADED UNIT WITH CAPTIVE DIAL |
Complete Unit – Including Cartridge, Dial, Lockscrew & Spring Washers
For Use with:
- Boring Bar:
- Insert: TC_ _16T3_ _
Left-handed version available on request – contact us
Spares List
Square Mounted Unit Spares
 |  |  |  |  |  |  |  |
|||
|---|---|---|---|---|---|---|---|---|---|---|
| Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | ||
| A Length | B Length | |||||||||
| Square Mounted Unit Spares | M7A5T16-100 | 7760 | 5330A | MS111 | - | M7 (6.0mm AF) | 7306 | 7243 | P3511 | T15 |
| TO ORDER CARTRIDGE ONLY, REMOVE THE DIAL REF. FROM UNIT PART NO. (REMOVE -40, -50, -50GA, -80, -100, OR -100GA) | ||||||||||
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Reviews
There are no reviews yet.