Description
Microbore Triangular Indexable Unit M3A5T09-50
Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm |
* | TC__0902__ | 26.6 | 31.0 | 7.9 | 12.3 | 3.0 | 1.6 |
* | TC__0902__ | 22.6 | 27.0 | 4.0 | 12.3 | 3.0 | 1.6 |
* = HEADED UNIT WITH CAPTIVE DIAL |
For Use with:
- Boring Bar:
- Insert: TC_ _0902_ _
Left-handed version available on request – contact us
Spares List
Square Mounted Unit Spares
 |  |  |  |  |  |  |  | |||
Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | ||
A Length | B Length | |||||||||
Square Mounted Unit Spares | M3A5T09-50 | Captive | 2330A | MS105 | - | M3 (2.5mm AF) | 3306 | 3243 | P2205 | T7 |
TO ORDER CARTRIDGE ONLY, REMOVE THE DIAL REF. FROM UNIT PART NO. (REMOVE -40, -50, -50GA, -80, -100, OR -100GA) | ||||||||||
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Reviews
There are no reviews yet.