Microbore Triangular Indexable Unit M10A5T16
Cartridge Body Only
For Use with:
- Boring Bar:
- Insert: TC_ _16T3_ _
Left-handed version available on request – contact us
Square Mounted Unit Spares
Microbore Unit: M10A5T16-100
Dial Wrench: 10330A
Lockscrew – A Length: MS115
Lockscrew – B Length:
Lockscrew Wrench: M10 (8.0mm AF)
Top Adjust Spring: 10243
Insert Screw: P3511
Insert Key: T15
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.