Description
Microbore ISO 80° Rhomboid Indexable Cartridge Unit M052-0L095C06-50GA
| Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm | |
|---|---|---|---|---|---|---|---|---|
| M052-0L095C06-50GA | CC__0602__ | EUROPEAN STANDARD GEAR ADJUST UNIT 95°APPROACH (FIG. 2) | 45.1 | 54.0 | 12.4 | 14.1 | 15.0 | 0.5 |
| M052-1L095C06-50GA | CC__0602__ | EUROPEAN STANDARD GEAR ADJUST UNIT 95°APPROACH (FIG. 2) | 40.0 | 48.8 | 7.0 | 14.1 | 15.0 | 0.5 |
| M052BS095C06-50GA | CC__0602__ | EUROPEAN STANDARD GEAR ADJUST UNIT 95°APPROACH (FIG. 2) | 37.9 | 46.0 | 3.8 | 13.8 | 15.0 | 0.5 |
Complete Unit – Including Cartridge, Dial, Lockscrew & Spring Washers
European Standard Gear Adjust Unit 95° Approach (Fig 2)
Right-handed version
For Use with:
- Boring Bar:
BT40-GA67A-180
BT50-GA67A-180
DIN40-GA67A-180
DIN50-GA67A-180
- Insert: CC_ _0602_ _
Left-handed version available on request – contact us
Spares List
Gear Adjust Unit Spares
| EUROPEAN STANDARD GEAR ADJUST HEADED UNIT 95° APPROACH (Fig 2) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
 |  |  |  |  |  |  |  | ||
| Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | |
| Gear Adjust Unit Spares | M052-0L095C06-50GA | 5855 | 5842 | MS208 | M5 | GRE05 | C02506 | T7 | |
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Standard Microbore Gear Adjust Accessories
NR5821 Spares Set – includes Worm, Spacer, Snap Ring – Sold only as a set
5842 – G.A. Wrench
Microbore strongly advise that any reconditioning work on gear adjust boring bars or boring rings is carried out by factory trained technicians.
Reviews
There are no reviews yet.