Description
Microbore Triangular Indexable Unit M022BS095TC-50
Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm | |
TC__06T1__ | EUROPEAN STANDARD HEADED UNIT 95°APPROACH (FIG. 2) | 18.4 | 23.0 | 2.5 | 10.1 | 7.6 | 0.2 | |
U3.8803L | EUROPEAN STANDARD HEADED UNIT 95°APPROACH (FIG. 2) | 18.4 | 23.0 | 2.5 | 10.1 | 7.6 | 0.2 | |
Complete Unit – Including Cartridge, Dial, Lockscrew & Spring Washers
EUROPEAN STANDARD HEADED UNIT 95° APPROACH (Fig 2)
Right-handed version
For Use with:
- Boring Bar:
- Insert:
U3.8803L
Generally ex-stock but allow 1-2 weeks
Left-handed version available on request – contact us
Spares List
Square Mounted Headed Unit Spares
EUROPEAN STANDARD SQUARE MOUNTED HEADED UNIT 95° APPROACH (Fig. 2) | |||||||||
 |  |  |  |  |  |  |  | ||
Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | |
Square Mounted Headed Unit Spares | M022-BS095TC-50 | Captive | 2330A | MS102 | M2 | 2306 | 2243 | TXS M2x4 | T6 |
To order Cartridge only, remove the Dial ref. from Unit part no. (remove -40, -50, -50, -50GA, -80, -100 or -100GA)
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Reviews
There are no reviews yet.