Description
DQ16H – Guide Pad
Indexable Carbide Deep Hole Drill (Type’s II, III & IV)
Inserts & pads compatible with other proven systems
Indexable Carbide Deep Hole Drill (Type II)
XXXXXXX-G : Insert with universal chip breaker
XXXXXXX-S : Insert with special chip breaker (suitable for hard chip-breaking)
Drill Head: SJø80.00-SJø82.69
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M4 | T15 | |
Middle Insert | / | 1 | M3 | T10 | |
Central Insert | / | 1 | M3 | T10 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: SJø82.70-SJø90.49
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M4 | T15 | |
Middle Insert | / | 1 | M3 | T10 | |
Central Insert | / | 1 | M4 | T15 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: SJø90.50-SJø106.99
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M4 | T15 | |
Middle Insert | / | 1 | M4 | T15 | |
Central Insert | / | 1 | M4 | T15 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: SJø120.01-SJø125.00
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M4 | T15 | |
Middle Insert | / | 3 | M3 | T10 | |
Central Insert | / | 1 | M3 | T10 | |
Guide Pad | 4 | M5 | T20 | ||
Indexable Carbide Deep Hole Drill (Type III)
XXXXXXX-G1 : Insert with universal chip breaker
XXXXXXX-G / GS : Efficient processing groove insert
XXXXXXX-L1 : Insert with Special Chip Breaker (suitable for hard chip-breaking)
Drill Head: Jø80.00-Jø82.69
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / / | 1 | M4 | T15 | |
Middle Insert | / / | 1 | M3 | T10 | |
Central Insert | / / | 1 | M3 | T10 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: Jø82.70-Jø90.49
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / / | 1 | M4 | T15 | |
Middle Insert | / / | 1 | M3.5 | T15 | |
Central Insert | / / | 1 | M3 | T10 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: Jø90.50-Jø106.99
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / / | 1 | M4 | T15 | |
Middle Insert | / / | 1 | M3.5 | T15 | |
Central Insert | / / | 1 | M3.5 | T15 | |
Guide Pad | 3 | M5 | T20 | ||
Indexable Carbide Deep Hole Drill (Type IV)
TPMX XXXXXX : Insert with universal chip breaker
TPMX XXXXXX-L : Insert with Special Chip Breaker (suitable for hard chip-breaking)
Drill Head: IJø78.00-IJø84.99
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M5-N | HG-4 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M4 | T15 | |
Middle Insert | / | 1 | M4 | T15 | |
Central Insert | / | 1 | M4 | T15 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: IJø85.00-IJø91.99
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M5 | T20 | |
Middle Insert | / | 1 | M4 | T15 | |
Central Insert | / | 1 | M4 | T15 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: IJø92.00-IJø98.99
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M5-N | HG-4 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M4 | T15 | |
Middle Insert | / | 1 | M5 | T20 | |
Central Insert | / | 1 | M5 | T20 | |
Guide Pad | 3 | M5 | T20 | ||
Drill Head: IJø99.00-IJø106.99
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Middle Pocket | 1 | M5 | T20 | ||
Central Pocket | 1 | M5 | T20 | ||
Peripheric Insert | / | 1 | M5 | T20 | |
Middle Insert | / | 1 | M5 | T20 | |
Central Insert | / | 1 | M5 | T20 | |
Guide Pad | 3 | M5 | T20 | ||
Indexable Counterbore with Insert & Pockets
XXXXXXX-G1 : Insert with universal chip breaker
XXXXXXX-G / GS : Efficient processing groove insert
XXXXXXX-L1 : Insert with Special Chip Breaker (suitable for hard chip-breaking)
Drill Head: JKø80.00DZ-JKø106.99DZ
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Peripheric Insert | / / | 1 | M4 | T15 | |
Guide Pad | 3 | M5 | T20 | ||
Auxiliary Pad | 1 | M3 | T10 | ||
Bakelite Guide Pad | 1 | M5 | T20 | ||
Drill Head: JKø107.00DZ-JKø180.00DZ
Quantity Required: 1
Order Code | Quantity Required | Screw | Wrench | ||
Peripheric Pocket | 1 | M6-N | HG-5 | ||
Peripheric Insert | / / | 1 | M4 | T15 | |
Guide Pad | 5 | M5 | T20 | ||
Auxiliary Pad | 1 | M3 | T10 | ||
Bakelite Guide Pad | 1 | M5 | T20 | ||
Refer to deep drills for inserts chip breaker: Special design as per customer’s request is available.
Auxiliary guide pad and bakelite guide pad are optional as per customer’s request.
Price on Application – Please email (sales@microbore.co.uk) or call the office (0044(0)24 76 373355) for details.
Reviews
There are no reviews yet.