Description
Microbore Triangular Indexable Unit M10A2T16-80
Microbore Unit | Insert | Dimension L in mm | Dimension M in mm | Dimension R in mm | Dimension S in mm | Dimension T in mm | Dimension H in mm |
TC__16T3__ | 76.2 | 78.6 | 22.2 | 31.8 | -0.8 | 4.8 | |
TC__16T3__ | 63.5 | 68.3 | 12.7 | 31.8 | -0.8 | 4.8 | |
Complete Unit – Including Cartridge, Dial, Lockscrew & Spring Washers
Right-hand version
For Use with:
- Boring Bar:
BT40-70M
BT50-70M
DIN40-70M
DIN50-70M
ISO40-70M
ISO50-70M
ISO50-71M
- Insert:
TC_ _16T3_ _
Left-handed version available on request – contact us
All units are supplied complete as shown including an insert key, but less inserts.
Replacement cartridges are supplied with insert screw, but less inserts.
To improve rigidity when cut depth exceeds 0.5mm, it is recommended that the top adjustment springs be removed. See Standard Boring Bar Range Catalogue page 21 for setting information.
Spares List
Angular Mounted Unit Spares
Microbore Unit | Dial | Dial Wrench | Lockscrew | Lockscrew Wrench | Washer | Top Adjust Spring | Insert Screw | Insert Key | ||
A Length | B Length | |||||||||
Angular Mounted Unit Spares | M10A2T16-80 | 10758 | 10330A | MS115 | - | M10 (8.0mm AF) | 10306 | 10243 | P3511 | T15 |
TO ORDER CARTRIDGE ONLY, REMOVE THE DIAL REF. FROM UNIT PART NO. (REMOVE -40, -50, -50GA, -80, -100, OR -100GA) |
Reviews
There are no reviews yet.